Important safety instructions – Sensaphone 400 User Manual
Page 5
3
IMPORTANT SAFETY INSTRUCTIONS
Your Model 400 has been carefully designed to give you years of safe, reli-
able performance. As with all electrical equipment, however, there are a few
basic precautions you should take to avoid hurting yourself or damaging
the unit:
• Read the installation and operating instructions in this manual
carefully. Be sure to save it for future reference.
• Read and follow all warning and instruction labels on the product itself.
• To protect the Model 400 from overheating, make sure all openings on
the unit are not blocked. Do not place on or near a heat source, such as a
radiator or heat register.
• Do not use your Model 400 near water, or spill liquid of any kind into it.
• Be certain that your power source matches the rating listed on the AC
power transformer. If you’re not sure of the type of power supply to your
facility, consult your dealer or local power company.
• Do not allow anything to rest on the power cord. Do not locate this
product where the cord will be abused by persons walking on it.
• Do not overload wall outlets and extension cords, as this can result in
the risk of fire or electric shock.
• Never push objects of any kind into this product through ventilation
holes as they may touch dangerous voltage points or short out parts that
could result in a risk of fire or electric shock.
• To reduce the risk of electric shock, do not disassemble this product,
but return it to Sensaphone Customer Service, or other approved
repair facility, when any service or repair work is required. Opening
or removing covers may expose you to dangerous voltages or other
risks. Incorrect reassembly can cause electric shock when the unit is
subsequently used.
• If anything happens that indicates that your Model 400 is not working
properly or has been damaged, unplug it immediately and follow the
procedures in Appendix F for having it serviced. Return the unit for
servicing under the following conditions:
1. The power cord or plug is frayed or damaged.
2. Liquid has been spilled into the product or it has been exposed to water.
3. The unit has been dropped, or the cabinet is damaged.
4. The unit doesn’t function normally when you’re following the operating
instructions.