Sensaphone 400 - Manual (Page 23)

Chapter 2: Installation
21
Chapter 2: InstallatIon
Correctly installing the Model 400 will ensure proper functioning of the
unit. Please read the entire chapter before starting the installation process.
Within the packaging will be a Warranty Registration Card. Please take the
time to fill this out and mail. The One Year Limited Warranty is explained
in the front of this manual.
2 .1 operatIng envIronment
The Model 400 should be installed and operated in a clean, dry area that
provides space for wiring sensors to the screw terminals, near an AC
power source and telephone line. Operating temperature ranges from 32°
Fahrenheit (0° Celsius) to +122° Fahrenheit (+50° Celsius).
NOTE: The Model 400 is a sensitive electronic device. Do not install
the Model 400 near strong electrostatic, electromagnetic or radioactive
fields. Do not expose to humid environments, fumes, or corrosive
vapors.
2 .2 mountIng
Flat Mount: Place the Model 400 on top of a desk or other horizontal
surface. Wall Mount: Mount on a wall with two flathead screws using the
keyholes on the back panel of the unit. Place the flathead screws or bolts
4” apart at the desired height from the floor. Hook the unit over the screws
and toward the floor. Refer to Figure 2-1.
4
2
Figure 2-1. Wall Mount
2 .3 power Surge proteCtIon
The Model 400 can be damaged by power surges and lightning through
the telephone line and the 120 VAC power supply. Although the Model 400
has built-in surge protection, we recommend that additional protection
be obtained for the unit and for any electronic equipment that is attached