MacDon 742 HAY CONDITIONER - Manual (Page 55)

Form # 46290 Issue 09/05 53
MAINTENANCE/SERVICE
GREASING THE HEADER (continued)
50 Hours
1. Cross Shaft Center Supports (A) – two fittings on double sickle header
NOTE: Location of fittings on back tube varies with header size.
2. Reel Support Bushings (B) – one fitting at R/H
end of split pick-up reel header.
100 Hours or Annually
1. Draper Roller Bearings (G) - 6 fittings
(two per idler roller, one per drive roller)
NOTE: To access drive roller fittings:
12’, 15’ and 18’ headers - loosen draper and push
drive roller towards center of header.
21’, 25’, 30’ & 36’ headers – loosen draper
tensioner or shift deck.
CROSS SHAFT CENTER SUPPORTS
DOUBLE SICKLE HEADERS
A
A
DRAPER ROLLER BEARINGS
G
REEL SUPPORT BUSHINGS – R/H
SPLIT PICK-UP REEL HEADER
B