Lenze CANopen control technology - Manual (Page 69)

DMS 4.2 EN 07/2011 TD17
L
69
Control technology | CANopen communication manual
Commissioning the CANopen Logic bus
Preparing the restart
8.9.1 Special features of the Servo Drives 9400
Servo Drives 9400 are not purely parameterisable devices. They require an application
download, where several files are transmitted to the memory module.
To operate a Servo Drive 9400,
 plug on the memory module.
 transmit the application using the »Engineer«. For this, you must keep the original
»Engineer« project.
 transmit the application using the L-force »Loader«. For this, you must export and keep
the required files from the »Engineer« project:
8.9.2 Special features of the Inverter Drives 8400
Inverter Drives 8400 are purely parameterisable devices.
To operate an Inverter Drive 8400, you can transmit the application using the »Engineer«.
For this, you must keep the original »Engineer« project.