Lenze EMF2111IB - Manual (Page 83)

Appendix
Code table
5
2111 INTERBUS fieldbus module
5.8
5.8.1
L
5.8-3 EDSIBS-1.0-06/2003
5.8.1.3 Code table for the DRIVECOM profile 21
Explanation of the following code tables:
Name Meaning
R/W Write/read authorization via LECOM
Ra =
only read access permitted
Ra/W = Read access always permitted, write access permitted under certain conditions (e.g.
depending on Lenze parameter L-C0001 (operating mode) or controller status)
PD Mapping to INTERBUS process data (index 6010
hex
, 6011
hex
)
PI = Process input data (from the controller to the host)
PO = Process output data (from the host to the controller)
POI = Process input and output data (see PO and PI)
- = Mapping of the process data not possible
SP Non-voltatile saving of the parameter
y =
Yes Parameter will be saved
n = No Parameter will not be saved
- = Parameter depends on the process and will therefore not be saved
Data str. Data structure
S =
Simple variable
The parameter consists of one value and can only be addressed via subindex 0.
A = Array variable (field parameter)
The parameter contains several values of the same data type. The individual elements can
be directly addressed by means of the subindex. Subindex = 0 addresses the whole
parameter contents.
R = Record variable (combined parameter)
The parameter contains several values of different data types. Subindex = 0 addresses the
whole parameter contents.
Data type Data type yp
BOL = Boolean FALSE = 00
hex
; TRUE = FF
hex
I8 = Integer8 −128 ≤ x ≤ 127
I16 = Integer16 −32768 ≤ x ≤ 32767
I32 = Integer32 −2147483648 ≤ x ≤ 2147483647
U8 = Unsigned8 0 ≤ x ≤ 255
U16 = Unsigned16 0 ≤ x ≤ 65535
U32 = Unsigned32 0 ≤ x ≤ 4294967295
OS = Octet string 8 bit/byte [= 1 byte or 8 bit per byte] binary coded
VS = Visible string; text coded to ISO 646
PDS = Process data description structure (index 20
hex
)
RS = Ramp structure (index 21
hex
)
Subindex 1: U32, numerator ”delta_speed“ in rev/min
Subindex 2: U16, denominator ”delta_time“ in seconds
Data number Display of the parameter elements
Data length Total length of the parameter in byte
Show/Hide Bookmarks