Lenze EMF2111IB - Manual (Page 27)

Data transfer
Process data channel configuration
5
2111 INTERBUS fieldbus module
5.6
5.6.1
L
5.6-5 EDSIBS-1.0-06/2003
The parameter describes the process data which are sent from the controller to
the INTERBUS master (input data for the INTERBUS master). Parameters of the
described process data assignment of Lenze controllers can be assigned to the
subindex values (see
( ¶ 5.6-6) ). Exception: The value for subindex 1 cannot be
changed.
Ensure that the parameters of the process data channel are only used once, i.e.
double assigment must be avoided (example: DC speed and speed setpoint are
sent via AIF-W1).
Parameter name (Index) Subindex Data structure Data type
PI data description (6000
hex
) 1 ... 13 R PBS(20
hex
)
) ) ) )
Note!
Only the valid subindex is displayed with the parameter 6000
hex
.
It is determined by PD!
Subindex
Meaning
Lenze setting Notes
Meaning
Value
1 Number of process data [byte] 04
hex
2 Index PI data word 1 6041
hex
DRIVECOM status word
3 Subindex PI data word 1 00
4/5 No entry 00
6 Index PI data word 2 6044
hex
DRIVECOM speed
7 Subindex PI data word 2 00
8/9 No entry 00
10 Index PI data word 3 5CA5
hex
AIF-OUT.W2 Of if code
C
11 Subindex PI data word 3 03
L-C1910 = 6
12/13 No entry 00
The parameter describes the process data which are sent to the controller from
the INTERBUS master (output data for the INTERBUS master). Parameters of the
described process data of Lenze controllers can be assigned to subindex values
(see
( ¶ 5.6-6) ). Exception: The value for subindex 1 cannot be changed.
Ensure that the parameters of the process data channel are only used once, i.e.
double assigment must be avoided (example: DC speed and speed setpoint are
sent via AIF-W1).
Parameter name (Index) Subindex Data structure Data type
PO data description (6001
hex
) 1 ... 13 R PBS(20
hex
)
Subindex Meaning Lenze setting index
/
Notes g
Value
6002 / Bit
1 Number of process data
[byte] 04
hex
2 Index PO data word 1 6040
hex
DRIVECOM control word 0
3 Subindex PO data word 1 00
4/5 No entry 00 1
6 Index PO data word 2 6042
hex
DRIVECOM speed setpoint 2
7 Subindex PO data word 2 00
8/9 No entry 00 3
10 Index PO data word 3 5CA7
hex
AIF-IN.W2 4 Only if
C
11 Subindex PO data word 3 03
hex
y
L-C1910 = 6
12/13 No entry 00 5
PI data description (6000
hex
) 9
PO data description (6001
hex
) 10
Show/Hide Bookmarks