ElmoMC SimplIQ Digital Servo Drives-Guitar Evaluation Board User Guide User Manual
Evaluation board, Whistle, bell & guitar, User guide
This manual is related to the following products:
Table of contents
Document Outline
- Safety Information
- Combined Evaluation Board
- .6 Introduction
- .7 Before You Begin
- .8 Whistle
- .8.1 Connecting the Whistle to the Evaluation Board
- .8.2 The Whistle & Connectors on the Evaluation Board
- .8.3 Evaluation Board Block Diagram (Whistle)
- .8.4 Whistle Connections on the Evaluation Board
- .8.5 User Connectors
- .8.6 Connecting the Power/Motor Cable to the Whistle
- .8.7 Connecting the Motor Power to the Whistle
- .8.8 Connecting the Main Power to the Whistle
- .8.9 Auxiliary Supply for the Whistle (Optional)
- .9 Bell
- .9.1 Connecting the Bell to the Evaluation Board
- .9.2 The Bell & Connectors on the Evaluation Board
- .9.3 Bell Evaluation Board Block Diagram
- .9.4 Bell Connections on the Evaluation Board
- .9.5 User Connectors
- .9.6 Connecting the Power/Motor Cable to the Bell
- .9.7 Connecting Motor Power to the Bell
- .9.8 Connecting the Main Power to the Bell
- .9.9 Auxiliary Supply (optional) for Bell
- .10 Guitar
- .10.1 Connecting the Guitar to the Evaluation Board
- .10.2 The Guitar & Connectors on the Evaluation Board
- .10.3 Evaluation Board Block Diagram (Guitar)
- .10.4 Guitar Connections on the Evaluation Board
- .10.5 User Connectors
- .10.6 Connecting the Power/Motor Cable
- .10.7 Connecting the Motor Power
- .10.8 Connecting the Main Power to the Guitar
- .10.9 Auxiliary Supply (optional) for Guitar
- .11 Feedback and Control Cable Assemblies
- .12 Main Feedback
- .13 Main Buffered Output Port
- .14 Auxiliary Feedback (Bi-directional)
- .15 General I/O Port
- .16 Communications
- .17 Powering Up
- .18 Initializing the System
- Technical Specifications
- Cables