ElmoMC SimplIQ Digital Servo Drives-Guitar Evaluation Board User Guide - Manual (Page 77)

Whistle, Bell Guitar Evaluation Board User Guide Technical Specifications
MAN-EVLBRD-WHI-BEL-GUI (Ver. 1.401)
77
Pin No. Type Port
15 D-Sub Socket MAIN FEEDBACK (P4)
15 High Density D-Sub Plug MAIN BUFFERED OUTPUT (P3)
26 High Density D-Sub Socket General I/O
Table A-2: Connectors on the Front of the Evaluation Board
Pin No. Type Port
8 RJ-45 CAN (J5)
8 RJ-45 CAN (J6)
15 High Density D-Sub Socket AUX. FEEDBACK
8 RJ-45 RS-232
Table A-3: Connectors on the side of the Evaluation Board
.21.1 Backup Power Supply (Optional)
Feature Details
Auxiliary power supply DC source only
Auxiliary supply input voltage 12 VDC ~ 195 VDC Guitar
12 VDC ~ 95 VDC Whistle/ Bell
Auxiliary supply input power < 7.5 VA (this includes the 5 V/2x200 mA load
for the main and auxiliary encoders)
Note: The Evaluation Board can operate without a 24 Volt back-up power supply.
Main General I/O
CANopen
Auxiliary
Feedback
RS-232
Main Buffered Output