10 guitar, 1 connecting the guitar to the evaluation board, Guitar – ElmoMC SimplIQ Digital Servo Drives-Guitar Evaluation Board User Guide User Manual
Page 32: Connecting the guitar to the evaluation board

Whistle, Bell Guitar Evaluation Board User Guide
Combined Evaluation Board
MAN-EVLBRD-WHI-BEL-GUI (Ver. 1.401)
32
.10
Guitar
This section explains how to connect the Guitar to the Evaluation Board, and provides
details about all the connectors.
.10.1 Connecting the Guitar to the Evaluation Board
Each Guitar has 83 pins; therefore, great care should be taken aligning its pins with the
sockets on the board when assembling. Push the Guitar into the Evaluation Board firmly and
evenly.
Figure 15: Assembling the Guitar on the Evaluation Board
H6
H7
H9
M 3 x 5 mm
Spring
washers
4 spacers
recommended
M 3 x 25 mm
H8
This manual is related to the following products: