ElmoMC SimplIQ Digital Servo Drives-Guitar Evaluation Board User Guide - Manual (Page 72)

Whistle, Bell Guitar Evaluation Board User Guide Combined Evaluation Board
MAN-EVLBRD-WHI-BEL-GUI (Ver. 1.401)
72
.17 Powering Up
After the device is mounted on the Evaluation Board and the cables have been connected
to their devices, the Evaluation Board is ready to be powered up.
Caution:
Before applying power, ensure that the DC supply is within the specified
range and that the proper plus-minus connections are in order.
.18 Initializing the System
After the Evaluation Board has been connected and mounted, the system must be set up
and initialized. This is accomplished using the Composer, Elmo’s Windows-based software
application. Install the application and then perform setup and initialization according to
the directions in the Composer Software Manual.