Despatch MIC1462 Controller Manual User Manual
Page 39
35
3.22 Aborting A Program
The operator may abort (i.e. terminate) the current program by holding down the
RUN/HOLD key for more than five seconds. When the program is aborted, a return is
made to the Base Mode and the Message area will read Aborted.
This message will be removed by the next key press.
3.23 "End Of Program" Indication
When the program has completed its End Segment (i.e. the last segment to
be performed), the message display will read At End, and a return is made to the Base
Mode. Press any key to clear the Message Display.