Atop Technology SE5416A User manual - Manual (Page 83)

Atop Industrial Serial Device Server
SE5408A/SE5416A Series
User Manual V 1.0
83
Figure 7.10
 Follow Sec. 7.1.2 to configure SE5416A Series in TCP Client mode properly.
 Click on the dropdown box of the Mode op tion and switch to “Virtual COM” to enabled
Virtual COM application in SE5416A Series.
 Match the Destination IP with the settings of Pair Connection Master’s IP that was setup
previously.
 Scroll to the bottom of the page and click on “Save Configuration” button to save the
changes.
7.2.7 TCP Server Application: Enable Reverse Telnet
Reverse Telnet is useful if a telnet program is used to connect to SE5416A Series and the
serial interface of the SE5416A Series is connected to a Terminal Server. Telnet programs in
Windows/Linux require special handshaking to get the outputs and formatting show properly.
SE5416A Series will interact with those special commands (CR/LF commands) if Reverse
Telnet is enabled.