Atop Technology SE5416A User manual - Manual (Page 59)

Atop Industrial Serial Device Server
SE5408A/SE5416A Series
User Manual V 1.0
59
6.5 Networking Configuration
This section allows you to change IP address, subnet mask, gateway, and SNMP information.
Please note that the new settings will not take effect until the device is restarted.
Operation: Main → [2]Networking
Figure 6.4
6.5.1 LAN 1 / LAN 2 Settings
Enter “LAN settings” and you will see a menu to configure the DHCP, IP address, subnet mask,
and gateway of that LAN.
Operation: Main → [2]Networking → [1]LAN 1 Settings;
Operation: Main → [2]Networking → [2]LAN 2 Settings
Figure 6.5