Atop Technology SE5416A User manual - Manual (Page 105)

Atop Industrial Serial Device Server
SE5408A/SE5416A Series
User Manual V 1.0
105
Figure 8.18
 Extend Server Connection Maintains the TCP connection for specified amount of time
after COM port is closed
 Attempt Server Connection Terminates pending connection attempts if they do not
succeed in the specified time
 Synchronize with Server Upon COM Port Open Required by NT Systems (2000, XP,
Vista, 7)
 Update Routing Table Upon COM Port Open Maintains IP route to a server in a
different subnet by modifying the IP routing table
 Enable Nagle Algorithm Provides better network efficiency by imposing a minor latency
on the data stream while it waits to fill network packets
 Always Limit Data Rate to COM Port Baud Rate Limits the data rate to the baud rate
that is in effect for the virtual COM port
 Attempt Server Connection If credential is set to Windows Credentials, VCOM
automatically adds the current Windows domain to the username
 COM Port Control Keep-Alive Controls the interval at which VCOM will issue the