2 tcp client mode, Tcp client mode – Atop Technology SE5416A User manual User Manual
Page 75

Atop Industrial Serial Device Server
SE5408A/SE5416A Series
User Manual V 1.0
75
7.1.2 TCP Client Mode
SE5416A Series can be configured as a TCP client in TCP/IP Network to establish a
connection with a TCP server in the host computer. After the connection is established, data
can be transmitted between a serial device and a host computer in both directions; this also
applies to Virtual COM running in the client mode.
Figure 7.3
By selecting the TCP Client mode, it means that a TCP Server program should be prepared to
connect to SE5416A Series; Figure 7.4 shows all the settings provided for the TCP Client.
This manual is related to the following products: