2 configuring alert event, Configuring alert event – Atop Technology SE5416A User manual User Manual
Page 67

Atop Industrial Serial Device Server
SE5408A/SE5416A Series
User Manual V 1.0
67
Figure 6.17
6.7.2 Configuring Alert Event
Choose the Alert events that SE5416A Series should trigger and the method it should use to
notify that event (Email, Trap, or Relay). Available events are Cold Start, Warm Start,
Authentication Failure, IP Address Change, Password Change, and Link Down.
Operation: Main [7]Alert Settings[2]Alert Event
Figure 6.18
This manual is related to the following products: