7 link modes and applications, 1 link mode configuration, Link modes and applications – Atop Technology SE5416A User manual User Manual
Page 71: Link mode configuration

Atop Industrial Serial Device Server
SE5408A/SE5416A Series
User Manual V 1.0
71
7 Link Modes and Applications
7.1 Link Mode Configuration
SE5416A Series supports different Link Modes, which are TCP Server, TCP Client, and UDP.
Under the three Link Modes, TCP Server can support RAW, Virtual COM, or Reverse Telnet
applications. TCP Client can support Virtual COM application. In the upcoming sections, we
will discuss how to setup different Link Modes properly.
Modes
Supports
TCP
Server
RAW
VCOM
Reverse Telnet
Client
VCOM
UDP
Connectionless protocol
This manual is related to the following products: