2 log settings, Log settings – Atop Technology SE5416A User manual User Manual
Page 43

Atop Industrial Serial Device Server
SE5408A/SE5416A Series
User Manual V 1.0
43
5.6.2 Log Settings
The Syslog function is turned on by default and cannot be turned off. It is used to log system
events and report to an external Syslog server if necessary. Also, Transmitted data could be
logged for recording or debugging purposes. The logs could be reported to an external Syslog
server as well.
Figure 5.23
System Log Settings
Enable Log Event to Flash, this would write log events to the local flash, otherwise the
logs would be cleared when the device restarts because they are stored in the RAM by
default.
Log Level, 3 (We only allow logging at this level).
Enable Syslog Server, enabling this option would allow you to send Syslog events to a
remote Syslog server.
Syslog Server IP, please specify the remote Syslog Serve IP.
Syslog Server Service Port, please specify the remote Syslog Server Port.