Apple Workgroup Server 8550 - Manual (Page 9)

1
Configuring Your Server
This chapter tells you how to configure your server’s software so you can
take advantage of your server’s hardware and software features. Most of
the configuration tasks are optional, but some of them allow the server to
deliver the highest performance. The tasks are:
m
configuring the system time and date (required)
m
installing device drivers (required only if you have installed an expansion card
or attached to your server a non-Apple hard disk drive or a SCSI device other
than a hard disk drive)
m
choosing a printer (optional)
m
configuring your monitor (optional)
m
choosing sound devices (optional)
m
configuring the Energy Saver control panel (optional)
Note: This chapter assumes that a keyboard, monitor, and mouse are
connected to your server and that your server is turned on. If you need to
connect these devices or if you don’t know how to turn the server on, see
the setup guide that came with your server.
9