Tcp/ip control panel user modes – Apple Workgroup Server 8550 User Manual
Page 35

TCP/IP control panel user modes
In Basic mode, the TCP/IP control panel looks like this:
In Basic mode, the TCP/IP control panel allows you to do the following (if
the settings are not locked):
m
Use the “Connect via” pop-up menu to change the default port for
TCP/IP.
m
Use the Configure pop-up menu to select a configuration method.
m
Enter the server’s IP address (if you are configuring manually).
m
Enter the server’s subnet mask number.
m
Enter the IP address of one or more name servers.
m
Enter the names of domains that are to be searched in order to locate a
remote host.
m
Enable the IEEE 802.3 variant of Ethernet (this option is available only
when Ethernet is selected in the “Connect via” pop-up menu).
35
This manual is related to the following products: