beautypg.com

Installation instruc tio ns – Poison Spyder JK ROCKER KNOCKERS User Manual

Page 6

background image

INSTALLATION INSTRUC

TIO

NS

Poison Spyder Customs • JK ROCKER KNOCKERS INSTALLATION

Page 6

©2009 POISON SPYDER CUSTOMS, INC. • 951-849-5911 • WWW.POISONSPYDER.COM

careful not to strip the threads on the nut

clips! It is sometimes necessary to “jiggle”

the bolt and/or nut clip a little bit to properly

align the threads. Only finger-tighten these

screws at this time.

16. Use the 1/2” box end wrench to tighten the

six (6) 5/16-18 lock nuts on the mounting

studs that protrude through the pinch weld

flange.

FIGURE 17

17. Use the 7/32” hex key to tighten the eight

(8) 3/8-16X1 SS button head socket cap

screws on the Rocker Knocker mounting

flange along the underside of the Jeep.

FIGURE 18

18. Repeat the procedure for the passenger

side.