Poison Spyder WINCH FAIRLEAD MOUNT User Manual

Installation instruc tio ns

INSTALLATION INSTRUC

TIO

WINCH FAIRLEAD MOUNT INSTALL NOTES

The Poison Spyder Customs Winch Fairlead

Mount is designed to work with bumpers and

winch mounts that do not already have an

integrated fairlead mount.
Installation is fairly simple with the right tools

and good mechanical abilities. If you are not

confident in your mechanical skills, please

seek the help of a professional to perform the

installation. Please read through these entire

instructions before proceeding with installation.

PARTS LIST

(1) Winch Fairlead Mount

TOOLS NEEDED

• Wrenches (to fit the existing hardware of

your winch and fairlead)

INSTALLATION NOTES
VERY IMPORTANT: Read and follow your winch

manufacturer’s Owners Manual and Operating

Instructions prior to operating your winch. Follow

all safety precautions during any operation of

your winch.
• Before you begin, park the vehicle in a

suitable workspace and set the parking

brake.

• The Winch Fairlead Mount comes

powdercoated black. Be careful to protect

the powdercoat finish during installation. If

you wish to paint the mount a different color,

scuff the powdercoat with sandpaper then

apply primer followed by the color of your

choice.

• Install the Winch Fairlead Mount BETWEEN

the winch and the bumper or winch plate.

You may need longer bolts (not included)

to secure the winch to the bumper or winch

plate, to compensate for the thickness of the

Winch Fairlead Mount.

• The Winch Fairlead Mount is designed to fit

the 10” x 4-1/2” bolt pattern common to most

Warn winches except 8274. Many other

winch brands use the same bolt pattern.

• The Winch Fairlead Mount is designed to

fit the winch rope slot and 10” bolt pattern

of most Warn or common aftermarket roller

or Hawse fairleads. Install your fairlead

according to the fairlead manufacturer’s

instructions.