Poison Spyder D-RING SHACKLE TAB User Manual

Installation instruc tio ns

INSTALLATION INSTRUC

TIO

D-RING SHACKLE TAB INSTALLATION NOTES

The Poison Spyder Customs D-Ring Shackle

Tab is designed to provide fabricators with a pre-

made, easy to install recovery attachment point.

INSTALLATION NOTES
VERY IMPORTANT: Installation should only

be performed by an experienced fabricator

or certified welder. If you are not confident in

your fabrication or welding skills, see your local

fabrication or welding shop to perform final

welding of the Shackle Tab.
Only attach the Shackle Tab to a strong,

STRUCTURAL member of your vehicle, bumper,

etc. The tab will see extreme forces under use,

and although it is 1” thick, it is only as strong as

the material it is attached to and the quality of the

welds. If welding to round tube, make sure that it

is AT LEAST .120” wall thickness if it is DOM or

chromoly tubing, or at least .150” wall thickness

for welded seam tubing. Flat plate should be

at least 3/16” thick if gussetted directly behind

where the shackle tab is welded, or 1/4” thick if

it will be attached to a span between structural

gusseting. These are basic guidelines and

minimums, your final design should be subject

to the scrutiny of an experienced fabricator.
Carfeully consider placement of the shackle tab.

Confirm that its location is ideal for all aspects of

use as an attachment point, clearance from the

rocks, easy access, etc.

WARRANTY

Poison Spyder Customs™ warranties all of

the products we sell and distribute for one (1)

year from the date of sale. These products will be

free from defects in material and workmanship

under normal installation, and use. Due to the

intended use the powder coat finish is warranted

for ninety (90) days. The finish warranty will not

cover a product if it has been damaged in any

way. Warranty is limited to repair or replacement.

Poison Spyder Customs™ does not offer any

type of labor or shipping allowance and all

warranty claims are subject to inspection by

Poison Spyder Customs™.
At the discretion of Poison Spyder Customs™,

the products in question can be repaired or

replaced when found defective. Prior to any

replacement or repair, written authorization must

be obtained from Poison Spyder Customs™.

Failure to contact us prior to having warranty work

preformed will immediately void all applicable

warranties; and it is then the sole responsibility

of the customer to remit any payment incurred.
The warranty expressed above is the sole

warranty of Poison Spyder Customs™, and

any other expressed or implied warranties are

hereby specifically excluded and disclaimed.

HOLD HARMLESS AGREEMENT
1. In purchasing a Poison Spyder Customs

Product™ I release, waive, discharge and

covenant not to sue Poison Spyder Customs

officers, servants, agents, or employees

(hereinafter referred to as Releasees) from

any and all liability, claims, demands, actions

and causes of action whatsoever arising out

of or related to any loss, damage, or injury,

including death, that may be sustained by

me (or anyone else), any property belonging

to me (or anyone else), whether caused by

the negligence of the releasees or otherwise,

while working on, using or any activity related

to this product.

2. I am fully aware of risks and hazards connected

with the use of a this product and I elect to