Poison Spyder JK ROCKER KNOCKERS Frame-Mount User Manual

Installation instruc tio ns, Frame-mount jk rocker knockers™ installation

INSTALLATION INSTRUC

TIO

Frame-Mount JK Rocker Knockers™ Installation

Thank you for purchasing Poison Spyder

Frame-Mount Rocker Knockers™ for your Jeep

JK. This product is easy to install with the right

tools and good mechanical abilities. If you are

not confident in your mechanical skills, please

seek the help of a professional to perform the

installation. Please read through these entire

instructions before proceeding with installation.
IMPORTANT: Completely install and remove the

product BEFORE painting or powder coating it.

This will allow you to check for fitment or do any

clearancing or fitting ahead of time, to reduce

the chance of damage to the finish during final

installation. Poison Spyder Customs Inc. is not

responsible for costs for or damage to paint or

powder coat finish under any circumstances,

including paint or powder coat of incorrectly

shipped or defective parts.

PARTS LIST
Please check your packages immediately upon

arrival to ensure that everything listed is included,

and to check for damage during shipping. If

anything is missing or damaged, call Poison

Spyder at (951) 849-5911 as soon as possible.

(1) Driver side JK Rocker Knocker, Frame-Mount
(1) Pass. side JK Rocker Knocker, Frame-Mount
(1) 1/2” ID X 1-1/4” OD X 3/16” thick spacer
(2) 1/2-20 X 1 Gr. 8 Hex Head Cap Screw

(2) 1/2 Gr. 8 Flat Washer
(4) 3/8-16 X 1-1/2 Gr. 8 Hex Head Cap Screw
(2) 3/8-16 X 1 Gr. 8 Hex Head Cap Screw
(6) 3/8-16 Gr. 8 Nylon Insert Lock Nut
(12) 3/8 Gr. 8 Flat Washer
(2) M12-1.5 X 40MM Hex Head Cap Screw
(2) M12 Flat Washer
(2) M12 Lock Washer

The following items vary by model:
2-DR 4-DR

(22) (28) 1/4-20X3/4 SS flat head cap screw
(22) (28) 1/4-20 nylon insert lock nut
(22) (28) 1/4 flat washer

TOOLS NEEDED

• Mechanic’s tool set with a standard

assortment of metric and SAE wrenches,

sockets, pry bars, etc.

• 1/4” & 29/64” drill bits and drill motor
• 1/2-20 threading tap & tap handle
• Anti-sieze compound
• Pneumatic or electric cut-off wheel & grinder

(some year models only)

• Fine-tip felt pen or center punch & hammer