beautypg.com

Poison Spyder LJ TRAIL CAGE KIT User Manual

Installation instruc tio ns, Tj-lj trail cage kit install

background image

©2010 POISON SPYDER CUSTOMS, INC. • 951-849-5911 • WWW.POISONSPYDER.COM

INSTALLATION INSTRUC

TIO

NS

TJ-LJ TRAIL CAGE KIT INSTALL

11

10

9

4

7

Thank you for purchasing a Poison Spyder Full

Cage Kit for your Jeep TJ. Poison Spyder’s

innovative Lazer-Fit technology provides for the

easiest, fastest installation of any aftermarket full

cage kit on the market. Installation does require

specialized skills and tools, such as welding. If

you are not confident in your mechanical skills,

please seek the help of a professional to perform

the installation. Please read through these entire

instructions before proceeding with installation.

PARTS LIST
Please check your packages immediately upon

arrival to ensure that everything listed is included,

and to check for damage during shipping. If

anything is missing or damaged, call Poison

Spyder at (951) 849-5911 as soon as possible.

(2) Lower A-Pillar L&R

4

(2) Upper A-Pillar Tube L&R

7

(1) Dash Bar

9

(1) A-Crossbar

10

(2) Forward Stringer L&R

11

(2) 1/2-13 X 2-1/2 Gr8 Hex Head Cap Screw
(2) Washer Plate
(2) 1/2-13 Grade ‘C’ All-Metal Lock Nut

TOOLS NEEDED

• Mechanic’s tool set including Torx bits
• Welder and proper welding equipment
• Protective welding blankets
• Square and measuring tape

INSTALLATION NOTES
Installation of the Trail Cage Kit can take up to 4

hours. This kit requires welding, which should

be done by a certified welder. You will need a

friend or two to assist with the installation.
IMPORTANT: It is imperative that the top, doors,

seats, plus any other components that are going

to be reinstalled after the cage install be test-

fitted BEFORE final welding of the cage! Poison

Spyder Customs is not liable for fitment issues

due to negligent install.

INSTALL PROCEDURE
NOTE: Throughout these procedures, refer to

the assembled trail cage diagram in Figure 1 for

reference identification and in proper general

orientation of cage components. In most cases,

the laser-cut notches and laser-etched assembly

marks will eliminate all guesswork. Regardless,

carefully inspect each part and its placement

This manual is related to the following products: