Poison Spyder JK ROCKER KNOCKERS - Manual

©2009 POISON SPYDER CUSTOMS, INC. • 951-849-5911 • WWW.POISONSPYDER.COM
INSTALLATION INSTRUC
TIO
NS
JK ROCKER KNOCKERS INSTALLATION
Thank you for purchasing Poison Spyder Rocker
Knockers for your Jeep JK. You now own the
ultimate in rocker panel protection for your Jeep.
If you purchased the Slider option, these have
already been welded to the Rocker Knockers
and install in the same manner, with the few
exceptions noted in the instructions. Installation
is fairly simple with the right tools and good
mechanical abilities. If you are not confident in
your mechanical skills, please seek the help of a
professional to perform the installation. Please
read through these entire instructions before
proceeding with installation.
PARTS LIST
Please check your packages immediately upon
arrival to ensure that everything listed is included,
and to check for damage during shipping. If
anything is missing or damaged, call Poison
Spyder at (951) 849-5911 as soon as possible.
(1) Driver side JK Rocker Knocker
(1) Pass. side JK Rocker Knocker
(16) 3/8-16X1 SS button head socket cap
screw
(16) 3/8 flat washer
(16) 3/8 split lock washer
(10) 3/8-16 U-nut clip “fat”
(6) 3/8-16 U-nut clip “skinny”
(12) 5/16-18 nylon insert lock nut
(12) 5/16 flat washer
The following items are provided only for Rocker Knockers
with Sliders, and vary by model:
2-DR 4-DR
(22) (28) 1/4-20X3/4 SS flat head cap screw
(22) (28) 1/4-20 nylon insert lock nut
(22) (28) 1/4 flat washer
TOOLS NEEDED
• 1/2” open end wrench
• 7/16” open end wrench
• 7/32” hex key
• 5/32” hex key
• 1/2” drill motor
• 1/4” drill bit
• 7/16” drill bit
• 9/16” drill bit
• Anti-sieze compound
• Pneumatic or electric cut-off wheel, body
saw or reciprocating saw (optional)
• Die grinder with 1/4” bit (optional)
• Touch-up paint (optional)
• Fine point felt tip marker
• Center punch