Poison Spyder JK BRAWLER ROCKERS - Manual

INSTALLATION INSTRUC
TIO
NS
©2010 POISON SPYDER CUSTOMS, INC. • 951-849-5911 • WWW.POISONSPYDER.COM
JK BRAWLER ROCKERS INSTALLATION
Thank you for purchasing Poison Spyder
Brawler Rockers for your Jeep JK. Although it is
a lengthy procedure, Installation is fairly simple
with the right tools and good mechanical abilities.
If you are not confident in your mechanical skills,
please seek the help of a professional to perform
the installation. Please read through these entire
instructions before proceeding with installation.
PARTS LIST
(1) Driver side Body Armor Upper Piece
(1) Driver side Brawler Rocker Lower Piece
(1) Passenger side Body Armor Upper Piece
(1) Passenger side Brawler Rocker Lower
Piece
(1) Nut Insert installation tool
The following items vary by model:
2-DR 4-DR
(22) (26) 1/4-20 nut-sert
(22) (26) 1/4-20X3/4 SS flat head cap screw
(16) (22) 3/8-16 clip-nut
(16) (22) 3/8-16X1 SS flat head cap screw
TOOLS NEEDED
• Bar clamps (2 or more)
• 1/4”, 25/64” drill bits and drill motor
• 7/16”, 9/16”, 18mm box end wrenches
• 5/32”, 7/32” hex keys
• 10mm, 13mm sockets and ratchet
• Anti-seize compound
• Masking tape
• Touch- up paint
• A friend to hold parts in place
BEFORE YOU BEGIN
• It is imperative that you read and follow
instructions to ensure that you will have a
successful installation.
• Failure to do so may result in an unsatisfactory
installation.
• It is the purchaser/installer’s responsibility to
inspect the package for any missing pieces
prior to beginning installation.
• Carefully read the product warranty and
hold harmless agreement at the end of this
document
• Read through instructions thoroughly before
beginning installation.