Brother MFC7150C - Manual (Page 67)

52
C H A P T E R S I X
Registering the Distinctive Ringing Pattern
If you are not sure which ring pattern you have, call your Telephone
Company. Then assign that pattern in the steps below.
1 Disconnect the MFC from any TAD or telephone company voice mail.
2 Set the MFC to MANUAL mode.
3 Press Function , 1 , 0 , 1 . The screen displays the current setting of
this feature.
4 Press or to select the SET mode. The screen displays
DISTINCTIVE:OFF?
DISTINCTIVE:SET?
5 Press Set when the screen displays DISTINCTIVE:SET ?.
6 Press or to select the prestored ring pattern you want to assign.
(You will hear each pattern as you scroll through the four patterns.) Be
sure to choose the pattern assigned by the Telephone Company.
Ring
Pattern
1
2
3
4
Rings
long - long
short - long - short
short - short - long
very long (normal pattern)
7 Press Set .
8 Press Stop to exit.
Once you’ve registered the Distinctive Ringing pattern in your MFC, you
can turn this feature ON or OFF. To change the setting, follow steps 1 to 4
above, selecting ON or OFF.