Brother MFC7150C - Manual (Page 149)

134
C H A P T E R F I F T E E N
Installing the Brother Software
1 Insert the Brother CD-ROM into your CD-ROM drive.
2 Enter the command for your version of Windows ® , if needed:
After you insert the Brother CD-ROM, you must type the appropriate
command for your version of Windows
® :
■ If you are using Windows ® 3.1 or 3.11, from the Program Manager,
click File, then Run. Then type x:\SETUP.EXE. (“x” is the drive
letter for your CD-ROM drive.) This will start the Software
Installation program.
■ If you are using Windows ® 95, 98 or Windows NT ® Workstation
Version 4.0, the Software Installation program appears automatically
when you insert the Brother CD-ROM.
■ For Windows ® 95, 98 and Windows NT ® Workstation Version 4.0, you can
also click on Start at the Desktop, select Run and then enter
x:\SETUP.EXE.
The Brother LOGO will be displayed on the screen.
If you are using Windows NT ® 3.51 or earlier, the following error message
will appear on the screen: You are running Windows NT ® 3.51 or earlier.
Brother MFL Pro does not support this version of Windows NT ® . YOU
MUST UPGRADE TO WINDOWS NT 4.0 AND REINSTALL MFL Pro!!
If you are using Windows NT ® Workstation 4.0 and you are not logged-in as
the Administrator, an error message will appear explaining the problem.