Brother MFC7150C - Manual (Page 109)

94
C H A P T E R T W E L V E
3 Press Set .
4 Press Record , then pick up the handset to record a message.
For example: Hello. We are unable to take your call at this time.
Please leave a message after the signal. If you wish to send a fax,
please
press 5 1, wait for fax tones, then press Start on your fax machine.
5 Replace the handset. The Message Center plays your OGM.
6 Press Stop to exit.
Listening to Outgoing Message (OGM)
1 Press Function , 1 , 8 , 3 .
2 Press or to select MSG CTR OGM (or F/T OGM).
3 Press Set when the screen displays your selection.
4 Press Play to hear the OGM. Adjust volume by pressing Volume
or .
5 Press Stop to exit.
Erasing Outgoing Message (OGM)
1 Press Function , 1 , 8 , 3 .
2 Press or to select MSG CTR OGM (or F/T OGM).
3 Press Set when the screen displays your selection.
4 Press Erase .
5 Press 1 to erase the OGM—OR—Press 2 to exit without erasing.
6 Press Stop to exit.
Activating Message Center Mode
Press Mode on the control panel until both the FAX and FAX/TEL lights are
on.
FAX
FAX/TEL
Message Indicators
Once you return home or to the office you can easily and quickly see if any
voice or fax messages have been stored in the Message Center. There are
two ways to determine if messages are stored.
See
Setting Up
Message Center
p. 92
See
Record F/T
OGM
(FAX/TEL
Outgoing
Message)
p. 44