Brother MFC7150C - Manual (Page 107)

92
C H A P T E R T W E L V E
Flexible Memory Settings (Message Storage)
Message Center Mode offers you six flexible memory settings, so that you
can decide which kinds of messages you want to receive.
1. FAX:ON VOICE:ON Both voice and fax messages are stored. You can
use the Fax Forwarding or Paging features and
retrieve voice and fax messages remotely.
2. FAX:ON VOICE:EXT You need an external answering machine
connected to the EXT jack for this setting. Fax
messages are stored in the message center
memory, but voice messages are stored in your
external answering machine. Retrieve messages
from the external answering machine. You cannot
use the Paging feature for voice messages with
this setting.
3. FAX:ON VOICE:OFF All memory is used to store fax messages—no
voice messages will be stored.
4. FAX:OFF VOICE:ON All memory is used to store voice messages—no
fax messages will be stored. Incoming faxes will
be printed on paper. You can use the Paging
feature, and retrieve voice messages remotely.
5. FAX:OFF VOICE:EXT You need an external answering machine connected to
the EXT jack for this setting. Incoming faxes are not
stored in memory, but will be printed on paper. Voice
messages are stored in the external answering machine.
6. FAX:OFF VOICE:OFF Incoming faxes are not stored in memory, but will
be printed on paper. Voice calls are not stored in
memory.
Setting Up Message Center
You must set up Message Center in the following order :
1 Turn Message Storage ON. (See p. 93.)
2 Record Message Center Outgoing Message (MSG CTR OGM).
(See pp. 93–94.)
3 Activate Message Center Mode. (See p. 94.)