Brother MFC7150C - Manual (Page 46)

31
O N - S C R E E N P R O G R A M M I N G
4. REMAINING JOBS
Function Description Factory Set More Info
Check which jobs are in memory or pp. 51, 58
cancel a delayed fax or polling job.
3. SETUP SEND
Function Description Factory Set More Info
1. COVERPG SETUP Automatically sends a cover page OFF pp. 59–62
you program.
2. COVERPAGE MSG Program customized message for — pp. 62–63
fax cover page.
3. CONTRAST Change lightness or darkness of a AUTO p. 63
fax you are sending.
4. RESOLUTION Allows you to change resolutions STANDARD pp. 68–69
page by page.
5. OVERSEAS MODE Adjusts for sometimes difficult OFF p. 64
overseas transmissions.
6. CALL RESERVE You can send a fax, then speak. OFF pp. 65–66
7. DELAYED FAX Send documents later. — p. 66
8. POLLED TX Sets up your MFC with a document OFF p. 69
to be retrieved by another fax machine.
9. REAL TIME TX When memory is full, you can OFF p. 58
send faxes in real time.
1. Fax Functions (continued)
2. SETUP RECEIVE
Function Description Factory Set More Info
1. RING DELAY Number of rings before MFC RING DELAY: 04 p. 42
TOLL SAVER: OFF p. 98
(For MFC 7160C Only)
2. F/T RING TIME Sets the time for “double ring” in 20 p. 43
FAX/TEL mode.
3. EASY RECEIVE Receive fax messages without ON p. 44
pressing the Start key.
4. REMOTE CODE Enter code to activate or deactivate ON ( 51, #51) pp. 47–48
MFC from a remote location.
5. REDUCTION Reduces size of image. AUTO p. 45
6. PAPER Selects size of paper for fax receiving. LETTER p. 46
7. POLLING RX Sets up your MFC to poll another OFF pp. 48–50
fax machine.
8. MF LINK Turn on if PC is connected to MFC ON p. 138
for PC receiving of voice and fax
messages.
answers in FAX/TEL, FAX, or
MC mode.