Brother HL-2400Ce - Manual (Page 99)

CHAPTER 4 CONTROL PANEL
4–35
If DEVICE is selected,
Display Message Card Operation
FORMAT DEVICE Format a new flash memory card, HDD card
or optional HDD.
Exit Exit to DEVICE OPERATION
When the display shows “FORMAT DEVICE,” press the
Set button to
format the installed card.
After the printer finishes formatting the device, you must exit to the
“DEVICE OPERATION” menu.
✒ Notes
•
When the card is formatted, data that was previously written is erased.
• It takes ten or more seconds to format a 2-Mbyte flash memory card,
HDD card or optional HDD. The larger the capacity of the device, the
longer time it takes to format.
When the installed flash memory card, HDD card or optional HDD is
formatted:
When you enter this mode menu with a formatted device installed, the
display shows the following menus:
Display Message Card Operation
DEVICE 1 Select Card 1.
DEVICE 2 Select Card 2.
DEVICE 3 Select optional HDD.
After you have selected the card, the display shows the following
messages:
Display Message Flash Operation
EXECUTE DATA Select the data ID and execute the selected data.
This menu appears only when data has been saved
on the card.
DEVICE LIST Print the contents of the flash memory, HDD card
or optional HDD. This menu appears only when
something has been saved in the device.
SAVE Save received data, macros and fonts.
DELETE Delete items from the device.