Brother HL-2400Ce - Manual (Page 106)

USER’S GUIDE
4–42
• Format Device
You can format the flash memory card, HDD card or optional HDD to
delete its contents. Instructions are in the following menu:
FORMAT DEVICE
When you press the
Set button in this menu, the printer asks if you want
to delete all contents of the device. Then press the Set button to start
formatting the device.
When you want to cancel formatting, move to the next menu with the ▲
or ▼ button and press the
Set button.
ADVANCED MODE
NETWORK MODE
Display Message Network Mode
LOCK PANEL=OFF Turns on or off lock panel function.
AUTO FF=ON Turns on or off auto form feed.
FF SUPPRESS=OFF Turns on or off the form feed suppress
function.
■ Lock panel
If someone other than you has changed the control panel settings and you
do not know about it, the printer may not print as expected or it may not
print at all.
To address this problem, lock or unlock the control panel as follows:
Display Message Lock Panel
LOCK=OFF Unlock the panel buttons of the printer.
(Factory setting)
LOCK=ON Lock the panel buttons of the printer.
Even if the control panel is locked, you can still use the
Sel , Form
Feed , Copy , Continue , Reset and Test buttons for their standard
functions. You can only check the settings of the other buttons, you
cannot make changes to them.. To change these settings you must first
unlock the control panel.