Setting up the printer, Remove the protective parts, Setting up the printer 2-4 – Brother HL-2400Ce User Manual

Page 33: Remove the protective parts 2-4

Text mode
Original mode

USER’S GUIDE

2–4

SETTING UP THE PRINTER

Remove the Protective Parts

After checking that you have all of the correct parts, temporarily place the
printer where you can easily reach all sides. Remove the protective parts
that secure the printer against damage during transportation, as shown
below:

✒ Important Note
It is CRITICAL that you SAVE all packing materials in the event you
must ship or store the printer. Failure to EMPTY, CLEAN and correctly
REPACK the printer according to the manufacturer’s instructions
BEFORE shipment will result in serious damage to the printer. This
damage may not be covered by your warranty.

1. Remove the protective parts as shown below.

Fig. 2-4 Removing the Protective Parts