About routine maintenance messages, About routine maintenance messages 4-4, Lj print 002 – Brother HL-2400Ce User Manual
Page 68: T1 auto
USER’S GUIDE
4–4
Status
Emulation Mode
AUTO: Auto emulation selection
PCL5C: HP PCL5C fixed
BRScript: BR-Script fixed
HP-GL: HP HP-GL fixed
FX-850: Epson FX-850 fixed
Pro.XL: IBM Proprinter XL
LJ PRINT 002
L
T1
AUTO
■ ■ ■ ■
K C M Y
Copy Pages
Orientation
“P”
... Portrait
“L”
... Landscape
“p”
... Reverse Portrait
“l”
... Reverse Landscape
Current Emulation
“##”
... Fixed emulation expressed with double figures
“LJ”
... AUTO HP PCL5C emulation
“BS”
... AUTO BR-Script 2
“GL”
... AUTO HP-GL emulation
“FX”
... AUTO EPSON FX-850 emulation
“PR”
... AUTO IBM Proprinter XL emulation
Fig. 4-2 Display
About Routine Maintenance Messages
This printer has some user serviceable parts that require periodic
replacement. The printer counts the number of printed pages and detects
the life of each of these parts. When the part nears the end of its useful
life, the following messages appear on the LCD display. These messages
will over-write the Emulation Mode status information.
Refer to
for detailed information on consumables life.
Maintenance Message
Meaning
K C M Y
When the
mark blinks ( ), the
indicated color toner is nearly
empty. K: Black, C: Cyan, M:
Magenta, Y: Yellow. When the
toner becomes empty the
indicator disappears completely.
FUSER OIL LOW
Oil in the Oil Bottle is nearly
empty.
REPLACE FCR
*1
Time to replace the Fuser Cleaner.
REPLACE OPC BELT
*1
Time to replace the (OPC) Belt
Cartridge.
REPLACE FUSER
*1
Time to replace the Fusing Unit.
REPLACE 120K KIT
*1
Time to replace the Drum Cleaner,
the Paper discharger and the
Transfer Drum.
*1 - After replacing these parts, you must reset the part life counter. This
enables the printer to begin tracking the part life correctly again. See
Paper Source
“T1”
... Tray 1
“T2”
... Tray 2
“MN”
... Manual Feed
Toner Level
■
: sufficient toner
(blinking
■): toner nearly empty
- disappear: toner empty