Brother HL-2400Ce - Manual (Page 149)

USER’S GUIDE
5-2
The following are Maintenance Messages and appear on the lower row of the LCD in On
Line mode. These messages advise you that you will need to replace each of the
consumables as soon as possible, since the consumable end of life has been reached. The
printer will continue printing when any of these messages are displayed:
LCD Maintenance
Message Consumable to
Replace Approximate
Life How to
Replace Order
No.
REPLACE FCR
Fuser Cleaner 12,000 pages
*1
See 5-9 FO-1CL
CR-1CL
REPLACE OPC BELT
(OPC) Belt
Cartridge 50,000 images
(continuously
printed) *1*4 See 5-13 OP-1CL
REPLACE FUSER
Fusing unit 40,000 pages
*1
See 5-17
REPLACE 120K KIT
Drum Cleaner,
Paper Discharger,
Transfer Roller
Paper Feeding
Roller
Separator Pad
Transfer Drum 120,000 pages See 5-20
*3
✒ Note
The Ozone Filter does not have an LCD message indicator. However, you will need to replace
it once a year.
*1 - at 5 % coverage print (A4-Letter size).
✒ Note
The toner cartridges shipped with the printer contain only half the normal amount of toner.
(5,000 pages (Black) and 3,000 pages (Cyan, Magenta and Yellow)).
*2 - For example, if the Cyan and Magenta toner cartridges are almost empty, the
indication will be “ ” ( = blinking )
K C M Y
If the Cyan and Magenta toner cartridges are empty, the indicator will have
disappeared.
*3 - To replace the Paper Feeding Roller, the Separator Pad and the Transfer Drum,
consult your local dealer/retailer or Service provider.
*4 - Definition of pages: actual output page number.
Definition of images: if the image on a page contains only one color of either
Cyan, Magenta, Yellow or Black =>1 image, two colors => 2 images, three colors
=> 3 images, four colors => 4 images.
✒ Note
•
Discard the used consumables according to local regulations. If you are not sure of them,
consult your local dealer/retailer. Be sure to re-seal the consumables tightly so that the
material inside does not spill out. Do not discard used consumables together with domestic
waste.
•
We recommend placing used consumables on a piece of paper or cloth to prevent an
accidental spill or scatter of the material inside.