Brother HL-2400Ce - Manual (Page 64)

USER’S GUIDE
3–14
Manual Feed
Since this printer does not have a manual feed or multi purpose tray, you
cannot manually feed irregular sized paper.. However, this printer has a
special Manual Feed Mode using Tray 1 (upper tray) to accommodate
non-standard paper sizes.
See
“Manual Mode” in Chapter 4 for more information on selecting this
setting in the printer control panel.
1. When the manual feed command is selected, the printer waits until
you load the paper in Tray 1 during manual feed mode operation.
T1 MANUAL FEED
**** SIZE
2. Pull out Tray 1 and place the paper you are going to use in the tray. It
may be necessary to remove some or all of the paper stack first,
depending on the size of paper in the tray and the size of the paper
you wish to print on manually.
3. Re-install Tray 1 and press the
Continue button. The printer then
starts printing.
✒ Note
•
Print quality may be affected by the type of paper you use and the
print image.
• You may experience poor paper feeding during Duplex printing.
•
This machine is not designed for continuous Duplex printing.
•
When you do manual duplex printing, if you leave the printer for
more than 5 minutes after you have finished printing the first side, the
printer will reset the function automatically.