Brother HL-2400Ce - Manual (Page 70)

USER’S GUIDE
4–6
BUTTONS IN NORMAL MODE
You can control the basic printer operations and change various printer
settings in the NORMAL mode. Functions available in the NORMAL
mode are shown above the panel buttons.
Copy Pages Orientation Feeder
Emulation Mode K Y M C Toner
Ready
Alarm
Mode
Continue
Font
Set
On Line Data
Sel Form Feed
Fig. 4-3 Buttons in NORMAL Mode
✒ Note
The factory settings are printed in bold in this section.
SEL Button
Pressing the Sel button toggles the printer mode between on-line and off-
line. When the printer is on-line, the On Line LED lights and the printer
is ready to receive data from the computer. When the printer is off-line,
the
On Line LED is off.
To receive data from the computer, set the printer on-line. To operate the
control panel buttons, set the printer off-line.
If you press the Sel button when the printer is on-line, it takes the printer
off-line and the LCD displays the current emulation.
You can enter other emulations in the AUTO emulation mode by
pressing the ▲ (UP) or ▼ (DOWN) button.