Brother HL-2400Ce - Manual (Page 199)

USER’S GUIDE
6–4
Error Messages
Error Message Meaning Action
32 BUFFER ERROR Input buffer overflow Reset the printer or turn off
and on the printer.
34 MEMORY FULL Work memory overflow Press the Continue button to
resume printing. If the same
error should occur after you
press the
Continue button,
turn off the printer. Wait a few
seconds, then turn it on again.
Reduce the input buffer size.
Turn off “KEEP PCL.” Add
DIMM memory with printer
power off. Download font and
the fonts saved in the HDD
card might cause the error, for
these occupy the same work
area as the RAM. Memory
expansion is recommended in
that case.
40 LINE ERROR Error in the communications
circuit When the serial interface is
used, check the
communications parameters
such as baud rate, code type,
parity, and handshake
protocols. When the parallel
interface is used, check the
interface cable connection.
41 PRINT CHECK Error in communication with
the engine controller Turn off the printer. Wait a
few seconds, then turn it on
again.