Konica Minolta bizhub 420 - Manual (Page 95)

Setting Up Network Printing 3
IC-204 3-24
6
Check the printer agent name, and then in the “NDPS Manager Name”
box, browse through the NDPS manager names, and register one.
7
In the “Gateway Types”, select “Novell Printer Gateway”, and then reg-
ister it.
8
In the Configure Novell PDS for Printer Agent window, select “(None)”
for the printer type and “Novell Port Handler” for the port handler type,
and then register the settings.
9
In “Connection type”, select “Remote (LPR on IP)”, and then register it.
10
Enter the IP address set for this machine as the host address, enter
“Print” as the printer name, and then click the [Finish] to register the
settings.
11
The printer driver registration screen appears. Select “None” for each
operating system to complete the registration.
2
Note
For settings for the queue user rights, printer notification option, assign-
ment of multiple queues, and passwords, refer to the NetWare documen-
tation, and set them as necessary.
Setting Up a Client (Windows) Settings When Using the NetWare Server
1
For Windows 98SE/Me/2000/NT 4.0, click the [Start], point to “Set-
tings”, and then click “Printers”.
For Windows XP/Server 2003, click the [Start], and then click “Printers
and Faxes”.
– If “Printers and Faxes” does not appear in the Start menu, open the
Control Panel from the Start menu, select “Printers and Other Hard-
ware”, and then select “Printers and Faxes”.
2
For Windows 98SE/Me/2000/NT 4.0, double-click the “Add Printer”
icon.
For Windows XP/Server 2003, click “Add a printer” on the “Printer
Tasks” menu.
The “Add Printer Wizard” starts up.
3
In the port settings, browse the network, and specify the name of the
created queue (or NDPS printer name).