Konica Minolta bizhub 420 - Manual (Page 296)

Various Settings 10
IC-204 10-21
Font Size
You can specify the font size to use when no setting has been specified from
the printer driver. (Default settings: Scalable Font – 12.00 point; Bitmap Font
– 10.00 pitch)
1
On the Utility Setting screen, touch [6 Printer Setting].
– For details on displaying the Utility Setting screen, refer to “To dis-
play the Utility Setting screen” on page 10-1.
2
Touch [3 PCL Setting].
3
Touch [3 Font Size].
4
Press the [C] (clear) key to erase the value, and then use the keypad to
type in the default font size (Scalable Font: between 4.00 and 999.75
points; Bitmap Font: between 0.44 and 99.00 pitches).
– Scalable Font: Specifies the font size in points.
Bitmap font: Specifies the width of the fixed-width font in pitches.
– If a value outside of the allowable range is specified, the message
“Input Error” appears. Type in a value within the allowable range.
5
Touch [OK].
The font size is set.
To cancel changes to the settings, touch [Cancel].