Konica Minolta bizhub 420 - Manual (Page 80)

Setting Up Network Printing 3
IC-204 3-9
5
Specify settings for the following:
SMB Print: Set whether to use the SMB printing service. Select “ON”
here.
NetBIOS Name: Specify the NetBIOS name (up to 15 alphanumeric
characters).
Print Service Name: Specify the printing service name (up to 31 alpha-
numeric characters).
Workgroup: Specify the work group name (up to 15 alphanumeric char-
acters).
6
To apply the settings, restart this machine (turn it off, then on again).
After turning OFF, wait for more than 10 seconds and turn it ON again,
and then the setting is changed.
Printer Driver Settings
For Windows 98SE/Me
1
Click the [Start], point to “Settings”, and then click “Printers”.
2
Right-click the icon of the installed printer, and then click “Properties”.
3
On the Details tab, click the [Add Port].
4
Select “Network”, and then click the [Browse]. In the network configu-
ration window that appears, select the appropriate printer icon.
For Windows NT 4.0/2000/XP/Server 2003/XP x64/Server 2003 x64
1
For Windows NT 4.0/2000, click the [Start], point to “Settings”, and
then click “Printers”.
For Windows XP/Server 2003/XP x64/Server 2003 x64, click the [Start],
and then click “Printers and Faxes”.
2
Right-click the icon of the installed printer, and then click “Properties”.
3
Click the [Add Port] on the Ports tab, double-click “Local Port” or select
“Local Port” and click the [New Port], and then enter
“\\\”.
– Enter the same NetBIOS name and printing service name that you
entered in PageScope Web Connection. For the setting procedure,
refer to “Operations on This Machine” on page 3-8.
4
Click the [Close] to apply the setting.