8 specifying the watermarks tab settings, Specifying the watermarks tab settings -45, Printing a watermark -45 – Konica Minolta bizhub 420 User Manual
Page 229
Setting Up the KONICA MINOLTA PS Driver (Windows)
6
IC-204
6-45
6.8
Specifying the Watermarks Tab Settings
Printing a Watermark
You can print specific text in the background as a watermark.
1
Click the Watermarks tab.
2
From the drop-down list, select the watermark that you want to print.
–
Watermarks can be newly registered. Refer to “Editing a Water-
mark” on page 6-46 for more information.
3
Specify settings for the following:
–
1st Page Only:
By selecting the check box, only the first page
is printed.
–
Transparent Text:
By selecting the check box, transparent water
marks are printed on the document.
–
As Outline Only:
By selecting the check box, only the outline of
characters is printed.
2
Note
If “Booklet” was selected in the “Setup tab”, the watermark is not printed.