Konica Minolta bizhub 420 - Manual (Page 311)

Various Settings 10
IC-204 10-36
Cache Function of Web Browsers
The newest information may not appear on the PageScope Web Connection
page due to the cache function of the Web browser. In addition, problems
can occur when the cache function is used.
When using PageScope Web Connection, disable the cache function of the
Web browser.
!
Detail
The menus and commands may vary depending on the Web browser. For
details, refer to Help for the Web browser.
If the cache function is enabled on the Web browser and a timeout occurs
in Administrator mode, the timeout page may appear even when Page-
Scope Web Connection is accessed again. When this happens, the ma-
chine’s control panel remains locked, and the main power of this machine
must be turned off, then on again. To avoid such problems, disable the
cache function.
When turning the power off, then on again, be sure to turn the sub-power
switch off first, then the main power switch. In addition, wait at least 10
seconds before turning the power on again; otherwise, this machine may
not function properly.
On Internet Explorer
1
On the “Tools” menu, click “Internet Options”.
2
On the General tab, click the [Settings] under “Temporary Internet
files”.
3
Select “Every visit to the page”, and then click the [OK].
On Netscape Navigator
1
On the “Edit” menu, click “Preferences”.
2
In the “Category” box, click “Advanced”, then “Cache”.
3
Under “Compare the page in the cache to the page on the network”,
select “Every time I view the page”.