Konica Minolta bizhub 420 - Manual (Page 104)

Various Printing Methods 4
IC-204 4-2
4
Click the [Preferences] or the [Properties] to change the printer driver
settings as necessary.
– By clicking the [Preferences] or the [Properties] on the Print dialog
box, you can specify the settings of each model on the printer driver
dialog box that appears. For details, refer to “Setting Up the PCL
Driver” on page 5-1, “Setting Up the KONICA MINOLTA PS Driver
(Windows)” on page 6-1 or “Setting Up the PPD Driver (Windows)”
on page 7-1.
5
Click the [Print].
The Data indicator of this machine flashes.
Test Printing
Printing is possible when the printer driver is installed and the network set-
tings have been specified. To check that connection has been made proper-
ly, you can print the standard Windows test page.
Print a test page from the printer driver Properties dialog box.
1
For Windows 98SE/Me/NT 4.0/2000, click the [Start], point to “Set-
tings”, and then click “Printers”.
For Windows XP/Server 2003/XP x64/Server 2003 x64, click the [Start],
and then click “Printers and Faxes”.
2
Right-click the icon of the installed printer, and then click “Properties”.
3
Click the General tab, and then click the [Print Test Page] or the [Print
Test].
The test page is printed and the confirmation dialog box appears.
4
Check the printout, and then click the [OK] or the [Yes].
2
Note
If the test page is not printed properly, check that the printer driver has
been installed properly and that the network settings are complete.