Konica Minolta bizhub 420 - Manual (Page 298)

Various Settings 10
IC-204 10-23
CR (Carriage Return) /LF (Line Feed) Mapping
You can specify the data substitution method when printing text data. (De-
fault setting: OFF)
Mode 1: Substitutes the data received in CR for CR-LF.
Mode 2: Substitutes the data received in LF for CR-LF.
Mode 3: Substitutes all the data received in CR-LF.
OFF: Does not perform substitution.
1
On the Utility Setting screen, touch [6 Printer Setting].
– For details on displaying the Utility Setting screen, refer to “To dis-
play the Utility Setting screen” on page 10-1.
2
Touch [3 PCL Setting].
3
Touch [5 CR/LF Mapping].
– Touch the button for the desired setting.
4
Touch the button for the desired setting.
5
Touch [OK].
– To cancel changes to the settings, touch [Cancel].