Konica Minolta bizhub 200 - Manual (Page 82)

Setting up network printing 3
200/250/350 3-23
3.8 Printing with NetWare
The printer controller supports the following environments.
Network printing in a NetWare environment
2
Note
Before using bindery emulation, check that bindery emulation is compat-
ible with the NetWare server.
For Remote Printer mode with NetWare 4.x bindery emulation
1
From a client computer, log on with Supervisor permissions to access
the NetWare server where the Pserver is registered.
2
Start up Pconsole.
3
From the “Available Options” list, select “Quick Setup”, and then click
the [Enter] button.
4
Enter the appropriate names in the “Printer Server Name”, “Printer
Name”, “Print Queue Name”, and “Print Queue Volume” fields, select
“Other/Unknown” from the “Printer type” field, and then save the spec-
ified settings.
5
Click the [Esc] button to quit Pconsole.
6
Use the NetWare server console to load PSERVER.NLM.
– For queue user privileges, printer notification option, assignment of
multiple queues, and passwords, refer to the NetWare documenta-
tion, and specify settings as necessary.
NetWare version Protocol used Emulation Service mode
NetWare 4.x IPX NDS/Bindery Pserver/Nprinter
NetWare 5.x/6 IPX NDS Pserver
TCP/IP NDPS(lpr)