Network printing from a windows operating system – Konica Minolta bizhub 200 User Manual
Page 63
Setting up network printing
3
200/250/350
3-4
Network connection methods that can be selected in each Windows op-
erating system
This chapter describes the settings that must be specified for network print-
ing.
Setting procedures differ depending on the method of networking printing
used (Windows, LPR, or IPP printing). Select the best method of network
printing for your Windows environment.
Network printing from a Windows operating system
* When using Port 9100 printing under Windows 98 Second Edition or Windows Me, the Peer to
Peer Printing Tool must be installed. For the details, refer to the table below.
Conditions when the Peer to Peer Printing Tool must be installed while using
Port 9100
*1
If the printer driver is installed using the installer while this machine is con-
nected to the network, the required Peer to Peer Printing Tool is also installed
automatically, and Port 9100 is created.
*2
The printer driver is not compatible with the operating system.
*3
Installing the printer driver using the installer is not applicable.
*4
Not required since standard operating system functions are used.
Proto-
col used
Win-
dows 98
SE
Win-
dows
Me
Win-
dows
2000
Win-
dows
XP/Vista
Win-
dows
NT 4.0
Win-
dows
Server
2003
Windows
printing
TCP/IP,
NetBEUI
+
+
+
+
+
+
LPR printing
TCP/IP
o
o
o
o
IPP printing
TCP/IP
o
o
o
Port 9100
printing
TCP/IP
+
*
+
*
o
o
o
Operating System
Windows 98SE/Me
Windows 2000/XP/Vista/2003
Driver type
Using installer
Not using in-
staller
Using installer
Not using in-
staller
Konica Minolta
PCL
Not required
*1
Required
Not required
*4
Konica Minolta
PostScript
-
*2
PostScript PPD
-
*3
Required
-
*2