Konica Minolta bizhub 200 - Manual (Page 65)

Setting up network printing 3
200/250/350 3-6
3.2 Setting the IP address for this machine
Use this machine’s control panel to assign an IP address to this machine.
2
Note
When specifying network settings, follow the instructions of the network
administrator.
Setting the IP address
1
Press the [Utility/Counter] key on this machine’s control panel, touch
[Admin. Management], and then enter the administrator password.
– The administrator password is required to enter Administrator
mode. Ask the administrator of this machine for the administrator
password.
2
Touch [Admin. 2].
3
Touch [Network Settings].
– If the [Network Setting 1]/[Network Setting 2] selection screen ap-
pears, touch [Network Setting 1].
4
Touch [Basic Settings].
5
Touch [IP Address Settings].